Europlex 3GS, Руководство пользователя

Страница: 319 / 386

15 - 4
3GS Controller
Security Grade Grade 3
SEAP Classification Class IV
Environmental Class Class II indoor general
PCB dimensions 150mm x 246mm
Cabinet dimensions:
3GS Euro Small 465mm length x 450mm height x 130mm depth*
3GS Euro Large 465mm x 450mm x 180mm
Power supply 8-14V via PSU connector J4
Quiescent current 200mA
Maximum current 370mA
Serial port power supply Not suitable for powering Aux devices.
Ringnet interface RS485, 307.2K baud
Memory backup Lithium battery
Temperature range -10°C to +40°C
Humidity range 0% to 90% (non-condensing)
Nodes 100
On-board zones 8 dual end-of-line using 2K2 (US: 1k470) resistors
(Expandable to 200 using nodes)
Zone loop response 500mS
Zone loop current (closed) 1mA approx.
Bell tamper (BHO/TR) Single 470R end-of-line resistor
Voltage substitution Greater than 1V on zone and BHO/TR inputs will cause a voltage
substitution condition
Front and back tamper Short from input to 0V will generate a tamper
On board outputs 4 x 1Amp relay
(Expandable to 255 using nodes)
Control line 12V @ 5mA max.
Used to indicate state of first 50 output types (mainly for DM1200
CNTL line interface.
Red LED Indicates comms traffic on ringnet
3 Serial ports 2 x TTL,1 x RS232 with RTS/CTS control
Default codes Engineer = 1010 Master = 1020
Engineer = 001010 Master = 001020 (6-digit option)
* All further dimensions will be given in this order.