Europlex 3GS, Руководство пользователя

Страница: 252 / 386

3GS Version 5 User Guide 9-35
E
DIT
T
IME
C
OMMANDS
An automatic time command is a programmed command string which instructs the
3GS to execute a function at a pre-set time. For example, the system could be
instructed to automatically Full set the premises at 18:00.
Certain time commands are for installer use only, as indicated below. The other
commands are for Master User use.
This mode is a simplified "time command edit" function which allows the Master
User to modify the TIME at which the action will occur without allowing alteration
of the command.
The new time must be valid (24-hour format) or the procedure will not continue.
Note Enter "24:00" hrs to disable a time command.
After adjustment is made the key should be pressed to program the new
time into the system.
Movement forward and backward through the time strings is provided by the
UNSET and PART keys.
SUNDAY HOUR
Checks for Hour change on Sundays. Installer user only.
LOG DUMP
Sets dial-out variable for system to dial a remote PC/Printer. Installer user only.
AREA 1 10M WARN to AREA 8 10M WARN
Automatic arming commands for Areas 1 to 8.
These commands (one for each block) start a 10-minute warning time (to inform
people that they must leave the building) after which time the relevant area will
arm.
BATTERY TEST
This command sets a time (1 per day) at which an automatic battery test will be
carried out. Installer user only.
FULL SET 10M WARN
Automatic arming command for the full system. Works in the same way as the
Area 10-minute Warning but in this case the full system will arm.
Late working time commands
These commands allow for late working on the premises. They will arm the system/
area if the first arming time command is cancelled. These are:
L.W. AREA1 WARN to L.W. AREA32 WARN
L.W. FULL SET WARN
E.g. AREA1 10M WARN may be set to 7pm and the L.W. AREA1 WARN set to
9pm. Normally the first time command would arm the area 1 at 7pm. However, if
the user cancels the first time command in order so that he/she may work late then
the first time command is ignored and the system will be armed by the second
time command at 9pm.
SIA TEST CALL
Sets a communication parameter. Installer use only.