Hardware Mounting
44
We.R System
Symptom
Symptom
The magnet detector
is not functioning, but
the LEDs glow when
required
Check the following:
1.
An icon on the web application displays a low battery
state for the device
2.
The connection may have been lost. Check the web
application for the relevant icon.
If there is a connection
lost icon for that device, try the following:
Replace battery and
verify that the battery is inserted
correctly with the "+" and "-" polarity observed
Check for RF interference (i.e. stereo speaker, wireless
telephone base)
D.3
Indoor Photo Detector (IPD) / Motion
Detector (PIR)
Symptom
Symptom
The IPD/PIR does not
detect or record
images
Check the following:
1.
An icon on the web application displays a low battery
state for the device
2.
Verify that the battery is inserted correctly with the "+"
and "-" polarity observed (Alkaline batteries only)
3.
Check for any damage to the device that may have
occurred during handling (i.e. dropping the device)
There is no detection,
though the camera is
still functional
Verify that the device is installed upside up
Device Orientation
After replacing the
batteries, the red light
in the PIR glows
periodically
The PIR is in test mode. The mode lasts 10 minutes
before the device becomes operational
