Hardware Mounting
We.R System
31
2.
Insert 1 AA battery and then close the battery cover.
Repeat these steps for additional Magnetic Detectors.
Figure 29: Window / Door Sensors Battery Cover and Compartment
A.5
Key Fob
1.
Using a small coin, rotate the battery cover ¼ turn (90
o
) counter-
clockwise, until the two dots on the battery cover and the back of the
device are aligned, and then remove the cover.
Figure 30: Key Fob Battery Cover
2.
With the Battery side facing up, insert the battery into the
battery Key Fob.
3.
Replace the battery cover, and using a small coin or screwdriver, rotate
the battery cover clockwise until the two dots on the battery cover are in
their original positions.
4.
All LEDs flash twice to indicate that the battery has been successful
installed and the Key Fob is recognized by the system.
