Hardware Mounting
We.R System
43
Symptom
Symptom
Alignment Dots
Magnet and Detector are Aligned
4.
Verify that both parts of the detector have been
mounted within 2 cm of each other
When detector is
triggered, the Status
LED is Off
Check the following:
1.
Verify that the battery is inserted correctly with the "+"
and "-" polarity observed
2.
Verify the magnet part of the detector has not lost its
magnetism
The detector status
LED is red, but there
has been no status
change to the magnet
detector(i.e. the door
or window is closed
Remove the battery from the magnet detector; wait a
few minutes and put it back in the magnet
compartment.
Separate the two parts of the detector and then putting
them back together. (i.e. open and close a door or
window)
Magnet Device Diagram
