Esaote O-scan eXP, Руководство пользователя

Страница: 82 / 242

•
•
•
•
•
•
2 / 22 Chapter 4
Electromagnetic requirements in the installation environment
Electromagnetic compatibility (EMC)
The O-scan system requires special precautions regarding
electromagnetic compatibility and installation and set-up must be
according to the EMC instructions provided in this section.
The configuration of O-scan required to ensure compliance with the
requirements of electromagnetic compatibility, envisages that the cables
required for connection of the system to the mains, as well as connection
of the system modem to the telephone line must have the properties
described below.
•
LAN connection: Ethernet cable, length less than or equal to 5 m,
with load impedance of 100 Ohm.
N o t e
The system is intended to provide basic safety and essential
performance producing images free of artefacts or distortions that a
medical expert, trained in the use of MR equipment, is not able to
distinguish from the internal structure of the anatomical area under
examination or, as an alternative, not producing images temporarily.
W a r n i n g
Use of a shielded booth and/or connection cables other than as
specified above may cause an increase in emissions or a decrease in
immunity of the O-scan system.