ES&S DS850, Руководство оператора

Страница: 169 / 199

Chapter 10: System Messages 163
EVS5200_DOC_SOP_DS850
Software Version 2.10
Published: February 26, 2014
1009567 - Camera
Interface - Camera no
response X X X This message appears when the
Scanner attempts to scan a ballot, but
the Camera Interface Board(s) senses
that there is no response from one or
both of the cameras. Write down the error message and notify an
appropriate election official. If possible,
shutdown and then turn off the Scanner. Wait 30
seconds and then turn the Scanner back on. If
the problem persists, an ES&S Service Technician
will need to be contacted. Since the Camera
Interface Board is a “COTS” (Commercial Off
The Shelf) product, the ES&S Technician may
have to contact a BAP Technician to diagnose
the problem.
1009568 - Camera
Interface - Transporter
no response X X X This message appears when the
Scanner attempts to scan a ballot, but
the Camera Interface Board(s) senses
that there is no response from the Ballot
Transporter. Write down the error message and notify an
appropriate election official. If possible,
shutdown and then turn off the Scanner. Wait 30
seconds and then turn the Scanner back on. If
the problem persists, an ES&S Service Technician
will need to be contacted. Since the Camera
Interface Board is a “COTS” (Commercial Off
The Shelf) product, the ES&S Technician may
have to contact a BAP Technician to diagnose
the problem.
1009700 - Input Tray:
Empty X This message appears on the initial
'Scan Ballots' screen, just prior to
scanning, when the Input Tray has no
ballots to scan. Put a stack of ballots, for the loaded election,
into the Input Tray.
1009701 - Input Tray:
Pick Error X X During scanning, when the Scanner has
trouble picking a ballot from the Input
Tray, ballot scanning stops and this error
appears on a 'Scan Ballots' error screen. Select either 'Scan More' or 'Done' from the
error screen and follow the on-screen
instructions for clearing the error (which includes
clearing the Ballot Transport Path).
System Messages
NOTE: A System Halt is a condition which requires the DS850 to be shutdown. It is not a condition which prevents the scanning of ballots.
Message Text
Message
Displayed
Message
Printed
Message
Logged
Results in a
System Halt
Cause Resolution