ES&S DS850, Руководство оператора

Страница: 181 / 199

Chapter 10: System Messages 175
EVS5200_DOC_SOP_DS850
Software Version 2.10
Published: February 26, 2014
1009731 - Storage: Disk
Space Low X X When 'Save' is pressed to save the
Current Batch, if the available memory
space is low for storing data on the
Scanner's internal hard drive, this error
will occur and a related 'OK' popup
screen will appear. Write down the popup's error message and
notify an appropriate election official. Select
'OK' to dismiss the popup. If this is the first time
you have seen this popup, the save procedure
should continue and be completed successfully.
Go to the 'Results' menu screen, select 'Archive
Data' and follow the on-screen information to
export archive data to a selected Target Media
Device. Once you have successfully archived the
data, select 'Clear All Results' from the 'Results'
menu screen. This should free-up enough
memory space to allow the scanning and saving
of Current Batches to continue for quite some
time.
1009750 - Syslog
process terminated X X This message appears if the System's
process of logging messages suddenly
stops. Write down the error message and notify an
appropriate election official. If possible,
shutdown and then turn off the Scanner. Wait 30
seconds and then turn the Scanner back on. If
the problem persists, contact an ES&S Customer
Service Representative for assistance.
1009751 - Unable to
determine filesize for
{1} X X This message appears if the System is
attempting to use (e.g. allot space for,
save, write to, read from, etc.) a file of
undetermined size. Note the actual
name of the file appears in place of the
“{1}”. Write down the error message and notify an
appropriate election official. If this error occurred
in response to an action taken on one of the
DS850 screens (e.g. saving the Current Batch),
attempt to repeat the action. If the problem
persists, contact an ES&S Customer Service
Representative for assistance.
System Messages
NOTE: A System Halt is a condition which requires the DS850 to be shutdown. It is not a condition which prevents the scanning of ballots.
Message Text
Message
Displayed
Message
Printed
Message
Logged
Results in a
System Halt
Cause Resolution