ES&S DS850, Руководство оператора

Страница: 75 / 199

Chapter 5: Pre-Election Day Tasks 69
EVS5200_DOC_SOP_DS850
Software Version 2.10
Published: February 26, 2014
5. When the Set Time selection
screen appears, use the up and
down arrows to modify the
settings for hours and minutes
and to change the indicator to
AM or PM.
6. After you have modified the
system time settings, press
Next
to display the Set Time
confirmation screen, or press
Cancel to cancel the change.
7. On the Set Time confirmation
screen, review your changes.
Then press
Save to save the new
settings, Cancel to cancel them,
or Back to return to the previous
screen.
Logic and Accuracy Testing
Perform logic and accuracy testing as required by your jurisdiction’s procedures and
applicable laws. Logic and accuracy testing includes zeroing totals, scanning the ballot
test deck, and checking reports.
A hand counted test deck for each election is available from ES&S. A test deck is a stack
of sample ballots that are marked and scanned at ES&S. The reports included with the
test deck contain accurate results for the election definition sent to your jurisdiction.
Use the test deck to verify your election definition and to test scanner operation. Be
sure to follow your local election laws regarding election testing.
The steps listed below are provided as a guide to help you develop a procedure for
logic and accuracy testing that meets the requirements of your jurisdiction.
1. Clear and initialize the scanner; see Clearing and Initializing the Scanner .