ES&S DS850, Руководство оператора

Страница: 151 / 199

Chapter 10: System Messages 145
EVS5200_DOC_SOP_DS850
Software Version 2.10
Published: February 26, 2014
1009508 - Camera
Interface - Parameter
not supported X X X This message appears upon initialization
of the BAPis Image Processor Board
when a system configuration parameter,
provided through the MCP/BAP
Interface is not supported by the board. Write down the error message and notify an
appropriate election official. If possible,
shutdown and then turn off the Scanner. Wait 30
seconds and then turn the Scanner back on. If
the problem persists, an ES&S Service Technician
will need to be contacted. Since the BAPis Board
is a “COTS” (Commercial Off The Shelf) product,
the ES&S Technician may have to contact a BAP
Technician to diagnose the problem.
1009509 - Camera
Interface - Image ID out
of range X X X This message appears when a ballot is
scanned but its resulting image ID is
outside the range expected by the
Master Control Program. Write down the error message and notify an
appropriate election official. If possible,
shutdown and then turn off the Scanner. Wait 30
seconds and then turn the Scanner back on. If
the problem persists, an ES&S Service Technician
will need to be contacted. Since the BAPis Board
is a “COTS” (Commercial Off The Shelf) product,
the ES&S Technician may have to contact a BAP
Technician to diagnose the problem.
1009510 - Camera
Interface - Error
memory allocation X X X This message appears upon initialization
of the BAPis Image Processor Board
when the board cannot allocate the
minimum amount of memory required
to collect the ballot images. Write down the error message and notify an
appropriate election official. If possible,
shutdown and then turn off the Scanner. Wait 30
seconds and then turn the Scanner back on. If
the problem persists, an ES&S Service Technician
will need to be contacted. Since the BAPis Board
is a “COTS” (Commercial Off The Shelf) product,
the ES&S Technician may have to contact a BAP
Technician to diagnose the problem.
System Messages
NOTE: A System Halt is a condition which requires the DS850 to be shutdown. It is not a condition which prevents the scanning of ballots.
Message Text
Message
Displayed
Message
Printed
Message
Logged
Results in a
System Halt
Cause Resolution