ES&S DS850, Руководство оператора

Страница: 157 / 199

Chapter 10: System Messages 151
EVS5200_DOC_SOP_DS850
Software Version 2.10
Published: February 26, 2014
1009524 - Camera
Interface - Image buffer
exceeding maximum X X X This warning message appears when a
ballot is scanned and its resulting image
data exceeds the maximum limit of the
image buffer on the BAPis Image
Processor Board. Write down the error message and notify an
appropriate election official. Since a “buffer
overflow” (see message 1009512) did not occur,
the system should allow normal operations to
resume. However, if normal operations are not
allowed to resume, shutdown and then turn off
the Scanner. Wait 30 seconds and then turn the
Scanner back on. If the problem persists, an
ES&S Service Technician will need to be
contacted. Since the BAPis Board is a “COTS”
(Commercial Off The Shelf) product, the ES&S
Technician may have to contact a BAP Technician
to diagnose the problem.
1009525 - Camera
Interface - Document
queue corruption
detected X X X This message appears if the BAPis
Image Processor Board detects
corruption of the Document Queue. Write down the error message and notify an
appropriate election official. If possible,
shutdown and then turn off the Scanner. Wait 30
seconds and then turn the Scanner back on. If
the problem persists, an ES&S Service Technician
will need to be contacted. Since the BAPis Board
is a “COTS” (Commercial Off The Shelf) product,
the ES&S Technician may have to contact a BAP
Technician to diagnose the problem.
System Messages
NOTE: A System Halt is a condition which requires the DS850 to be shutdown. It is not a condition which prevents the scanning of ballots.
Message Text
Message
Displayed
Message
Printed
Message
Logged
Results in a
System Halt
Cause Resolution