ESAB ET 220i AC/DC, Руководство по эксплуатации

Страница: 38 / 74

ET 220I AC/DC
INSTALLATION, OPERATION AND SETUP Manual 0-5346
3-26
3.16 User Specific Menus
Art # A-12851
Figure 3-14: User Specific Menus
• Switch off the power to the unit.
Press and hold the BACK Welding Parameter Button (22) .
Switch on the power to the unit.
The User Specific Menus are activated.
After the User Specific Menu items have been set, switch the power off to the unit to save the settings.
Menu item Range LED Code
(Left Display)
Parameter Value
(Right Display)
Factory
Setting
C02 – Water Pump Error
Message Display
Set this to “ON” if a water cooler
without a suitable interface lead
is being used.
Set this to “OFF” if a water
cooler with a suitable interface
lead is being used.
ON
OFF
ON
C06 – Downslope Mode
When set to “ON” in 4T mode,
the downslope will continue
even if the trigger is released
during the downslope time.
When set to “OFF” in 4T mode,
the downslope will stop as soon
as the trigger is released during
the downslope time.
ON
OFF
OFF