ESAB ET 220i AC/DC, Руководство по эксплуатации

Страница: 11 / 74

ET 220I AC/DC
Manual 0-5346 INTRODUCTION
2-3
2.09 Specifications
Description ET 220i AC/DC
Power Source Part Number
W1009300
Power Source Mass
29.5lbs (13.4Kg) without power cable
Power Source Dimensions
H13" x W7.25" x D19"
(H326mm x W185mm x D483mm)
Cooling Fan Cooled
Welder Type
Inverter Power Source
Standards CSA E60974-1, ANSI/IEC 60974-1
Number of Phases 1/3 phase
Nominal Supply Voltage
208-230/460VAC (1 phase)
+/-15%
208-230/460VAC (3 phase)
+/-15%
Nominal Supply Frequency 50/60Hz
Welding Current Range (Stick Mode)
10 – 150A (1 phase) 10 – 170A (3 phase)
Welding Current Range (TIG Mode)
5 - 200A (1 phase) 5 - 220A (3 phase)
Effective Input Current (I
1eff
) (note2) 27.6A (208V, 1 phase)
25.0A (230V, 1 phase)
15.2A (460V, 1 phase) 16.8A (208V, 3 phase)
15.2A (230V, 3 phase)
8.2A (460V, 3 phase)
Maximum Input Current (I
1max
) 37.3A (208V, 1 phase)
33.7A (230V, 1 phase)
18.1A (460V, 1 phase) 24.5A (208V, 3 phase)
22.1A (230V, 3 phase)
11.9A (460V, 3 phase)
Generator Requirement (note4)
13kW (16kVA @ 0.8PF)
Stick (SMAW)
Welding Output, 40ºC, 10 min. 150A @ 40%, 26.0V (1 phase)
140A @ 60%, 25.6V (1 phase)
120A @ 100%, 24.8V (1 phase)
170A @ 40%, 26.8V (3 phase)
140A @ 60%, 25.6V (3 phase)
120A @ 100%, 24.8V (3 phase)
TIG (GTAW)
Welding Output, 40ºC, 10 min.
200A@45%, 18.8V (1 phase)
180A@60%, 17.2V (1 phase)
160A@100%, 16.4V (1 phase)
220A @ 40%, 18.8V (3 phase)
180A @ 60%, 17.2V (3 phase)
160A @ 100%, 16.4V (3 phase)
Open Circuit Voltage (VRD active)
<113V
Protection Class IP23S
Table 2-1: Power Source Specification