ESAB ET 220i AC/DC, Руководство по эксплуатации

Страница: 32 / 74

ET 220I AC/DC
INSTALLATION, OPERATION AND SETUP Manual 0-5346
3-20
3.13 Tip Tronic Operation
In GTAW modes, up to 100 jobs can be saved. These are arranged as 10 jobs numbers, in 10 job sets.
These are shown on the meter displays. The first number on the display is the job set, the second is the job number. In the example, the
job set is 2 and the job number is 9.
Saved TipTronic jobs can also be set as active or inactive.
Inactive jobs are skipped during TipTronic job selection.
TipTronic Operation
• Using the Welding Mode button (10) select TipTronic mode (14).
• Use the Multi Function Control (24) to select the job set number and the job number.
Note that if no TipTronic jobs are saved, it will not be possible to select any TipTronic jobs.
• Use the BACK button (22) or FORWARD button (22) to switch between TipTronic jobs and all main parameters.
T
4T 2T
Art # A-12847
Figure 3-10: Tip Tronic Operation
Save a TipTronic Job (Only TIG parameters can be saved as Tip Tronic jobs)
• Set all the required GTAW welding parameters. Using the Welding Mode button (10) and the Welding Type button (17).
Do NOT select TipTronic mode (14) at this stage.
As an example, we may select HF, AC, 4T Pulse GTAW (LED’s 18, 21, 16 and 12 will be illuminated.
• Press the SAVE button (53).
The display will show the Job Number identification, the job set and job number.
• Use the Multi Function Control (24) to select the job set number and the job number.
• Press and hold the SAVE button (53) until all LED’s illuminate briefly to indicate a Save has been completed.
Note that you can interrupt the Save process, by simply briefly pushing the SAVE button (53)