Ergomotion Motion Air, Руководство пользователя

Страница: 13 / 34

11
STEP 11
STEP 14
STEP 12
STEP 15
STEP 13
STEP 16
STEP 17
installation guide
d . Slide a Pin through the washers and
holes in the Head Motor, then secure
the Pin with a Clip .
Fig.J4
Foot Motor assembly is now complete .
All three yellow labels should be on the
same side.
Plug the Head motor (WHITE) and
Foot Motor (BLUE) cables into the
corresponding ports on the control box .
To install the legs, connect all of the four 3"
leg segments together to create six 12" legs .
Screw the whole legs into the nutserts on the
frame . Do not overtighten .
Note:
a. The minimum leg height required for the adjustable base is 6" .
Using a 3" leg could cause damage to the base or floor .
b. The legs untwist into separate sections for custom leg height options .
Uncoil the Input Cord (connected to control box’s
power port) and plug it into Power Supply .
Insert the Power cord into the control box's
"POWER" Port .
Insert the Power Cord into the Power Supply .
Using two people, carefully flip the base over onto its legs . Do not drag
frame across the floor or rest frame on its side, as excessive pressure may
damage the legs .
Fig.K
Fig.L
To sync two bases with the Sync Cord, see pages 16-17.
Fig.M