Ergomotion Motion Air, Руководство пользователя

Страница: 12 / 34

10
b . Slide a pin through the Foot Motor
Bracket holes and secure it with a Clip
(Fig .H3) .
Fig.H2
Fig.H3
a . Locate the Foot Motor (YELLOW) .
Align the motor-end holes with the
holes in the frame shown in Fig .I1 .
b . Slide a Pin through a washer, then
through the holes of the Foot Motor .
Fig.I1
Fig.I2
Fig.I3
c . Secure the Pin with another washer and
a Clip .
Pin Washer Washer Clip
STEP 9
STEP 10
Fig.J1
Fig.J2
Fig.J3
a . Remove the Pins from the Foot Motor
Bracket so that you may install the Foot
Motor .
b . Insert a washer into each side of the Foot
Motor Bracket .
c . Align the holes of the bushings with the
holes on the Foot Motor Bracket .
installation guide