background image

3

safety precautions and usage statements

The angle (designated “b” in figure 1) between the flat section and foot section 

for various configurations of the mattress support platform shall be ± 3°, which 

translates to a tolerance of up to ¾” . 

Any adjustable foundation deemed to be within these allocated tolerances is 

considered to have met the manufacturer’s quality control standards .

THAT “NEW PRODUCT” SMELL

Some people notice a slight odor to their new adjustable base . This can come 

from our material manufacturing process and the smell normal and usually 

disappears before the product reaches you . Sometimes, however, this smell 

may still be noticeable . It usually disappears after a few weeks, providing 

adequate ventilation of the product and the environment .

 

BREAK IN PERIOD

You can speed up the break-in period by simply spending time in the adjustable 

bed through activities such as reading, watching TV or playing with the kids or 

grandkids . The extra movement will help the adjustable base respond to weight 

and temperature changes . Some of the materials in our adjustable bases such 

as the woods, metals and plastics used in the platform, frame and components 

are sensitive to moisture content and temperature and may make sounds in 

colder environments .

PAIRED OPERATION

When operating a “paired” split base setup there may be a time latency up to 

1 .5 seconds between each bases articulation .

WEAR AND TEAR

Wear and tear is damage that naturally and inevitably occurs as a result of 

normal use or aging .

FABRIC CARE

To prolong the life of your fabric, protect from direct sunlight whenever possible . 

For spot cleaning, wipe area with a light damp sponge or vacuum with a soft 

brush attachment to remove particles . Keep at a minimum of 30 cm (12 inches) 

away from direct heat sources . For a deeper cleaning, blot liquid spills with a 

clean dry cloth . Wipe with a clean cloth dampened with warm water . Do not wet 

excessively . A soft bristle brush may be used to remove ingrained soil . Avoid 

scratching by gentle brushing . Wipe with a clean cloth dampened with warm 

water to remove residues . Dry in shade away from direct heat . If persistent marks 

remain visible after cleaning, seek professional advice .

 

PRODUCT RATINGS

The lift motors are not designed to operate continuously for more than two (2) 

minutes in an eighteen (18) minute time period or approximately 10% duty cycle . 

Attempting to circumvent or exceed this rating will shorten the life expectancy of 

the product and may void the warranty .  

WEIGHT LIMITS

This product is not rated to support weights in excess of 750 pounds inclusive 

of the mattress and bedding . The base will structurally support this weight, 

provided it is evenly distributed across the bed base . The adjustable base is 

not designed to support or lift this amount in the head or foot sections alone . 

Exceeding this weight restriction could damage the bed and/or cause injury and 

will void the warranty . 

Содержание Motion Air



































Отзывы: