Epson Stylus Color 800, Руководство по обслуживанию

Страница: 33 / 187

Product Description
Rev. A
1-25
1.6.7 Initialization Items and Values
The values used when this printer is initialized are described under
Default Settings. Values set through
the default setting mode or the remote control codes are, however, stored as initialization values only after
power off. On the other hand, values set by other methods are cleared at power off, and the printer returns
to the initialization values shown in the table when the printer is initialized.
Table 1-29. Initialization Values
Initialization Item Default Set
by Panel Operation?
EPSON Control Codes? Factory Value
Print direction Y Y Auto
Font Y Y Courier
Pitch N Y 10 cpi
I/F Y Y Auto
Auto I/F wait mode Y Y 10 seconds
Software Y N ESC/P 2
Auto CR (IBM mode only) Y Y Off
AGM (IBM mode only) Y Y Off
Character table Y Y PC437
Character table for NLSP Y Y PC437
Auto line feed Y Y OFF
Network I/F mode Y N Off
Loading position Y Y 8.5 mm
Economy mode Y Y OFF
Parallel l/F mode Y N Fast
Line spacing N E 4.23 mm (1/6 inch)
Page length N Y Maximum
Y: Stored after the printer is powered Off.
E: Effective only while printer power is On.
N: Cannot change.