Epson Stylus Color 800, Руководство по обслуживанию

Страница: 131 / 187

Adjustment
Rev. A
4-11
5. Enter the 4-column code which corresponds to the destination for “Memory-SW data (4 col data)”
and press “ENTER” key. (See the code list on Page 4-6.)
6. Enter “2” for “Select menu : ?” to select “Adjustment/Print inspection” in the menu.
7. Press “ENTER” key, and the sub menu below appears.
8. Enter “1” for “Select menu : ?” to select “Write to the Head voltage value” in the menu.
9. Press “ENTER” key, and the following appears.
10. Input the correct head voltage with 5 colums and check if the head voltage value was input on the
confirmation menu which is shown on the screen. If correct, press “ENTER” key. If incorrect, press
“SPACE” key and replace the incorrect value with the correct one.
...........
........................
......................
.....................
.......
.............
Ink charge
All adjustment
Select Menu ?_
BI-D (center value 0,0)
Gap Timming (center value 0,0)
.............
0
1
2
3
4
5
6
7
8
9
Stylus COLOR 800 J70C00E
Customer : Standard Customer Data <****> 12-03-1996
..........................
.......
..............................
Write to the Head voltage value
Head angular adjustment
BK.-M Linear adjustment
Head GAP timming adjustment
Bi-d adjustment
Print inspection
Ink discharge
Customer data change/End
Figure 4-13. “Adjustment/Inspection” Sub Menu
<<<< Write the HEAD Voltage value>>>>
Black Head voltage
Black voltage value (5chr. ID data (ex.18A09)) :
----Voltate value----------------------
Black voltate value :
Color voltage value :
Figure 4-14.
“Write to the Head Voltage Value”