Epson Stylus Color 800, Руководство по обслуживанию

Страница: 168 / 187

Maintenance
Rev. A
6-1
6.1 General Description
In order to keep the printer in the optimum condition, it is essential to perform several types of
maintenance on a regular basis. The maintenance includes cleaning, lubrication, ink drain pad
replacement, and printhead cleaning. The cleaning is to wiping off the dirt and dust on the outer cases
using denatured alcohol as well as vacuuming debris and dust accumulated in the printer. A printer
generally consists of numbers of gears engaged. Therefore it is important to check if the gears are
adequately lubricated. In addition to the above mentioned maintenance, this printer, an ink-jet printer,
needs an occasional ink pad replacement and printhead cleaning when necessary. This chapter gives
information on when and how to maintain the printer.
;
Be sure to unplug the AC power cable before disassembling and assembling the printer.
;
Be careful not to get ink in your eyes. In case ink gets in your eyes, wash it away with fresh water
and see a doctor.
;
Follow the instructions below when handling the lithium battery installed on the C202 MAIN board.
„
Keep the battery away from any metal materials.
„
Ensure to mount the battery in the right direction.
„
Do not heat up or burn the battery.
;
Once the ink cartridge is removed from the ink cartridge holder for servicing, replace it with a new
one before returning to the customer.
6.2 Maintenance
6.2.1 Cleaning
To obtain the optimum condition of this printer, it is indispensable to keep it clean by removing dust and
dirt not only on the outer case but inside the printer. Accumulated dust and debris may cause a printer
malfunction. Therefore be sure to clean the printer, specially inside, whenever you get a chance. Read the
“CAUTION” below before any cleaning operation.
;
Never apply thinner, trichloroethilene, and toner-based solvents to any plastic parts. It may deform
or degenerate plastic or rubber parts.
;
Do not use a hard brush for cleaning so as cases won’t be damaged.
;
Be careful not to damage any interior parts when cleaning inside the printer.
;
If you need to remove the ink remaining on the PF roller, apply alcohol absorbed in the soft cloth.
It is, however, required that the PF roller be serviced with a care, since it is coated with powdery
material, which might be peeled by impact.
WARNING
CAUTION