Epson Stylus Color 800, Руководство по обслуживанию

Страница: 141 / 187

Adjustment
Rev. A
4-21
13. Follow the menu by entering a dummy M/C No. in 3 digits and black/color head voltages
corresponding the installed printheads, then press “ENTER” key, and the menu below appears.
14. If the value input is incorrect, press “SPACE” and enter the correct value. If the input values are
correct, proceed to the menu shown below by pressing the “ENTER” key.
15. Enter “2” for “Select menu : ?” to select “S.F. paper print test” in the menu, then press “ENTER”
key, and the printer outputs the result of the head gap timing adjustment , along with the results of
other adjustments.
16. Look at the output to check if the lines are most closely aligned. If not, enter “9” for “Select menu :
?” to select “Return to the MENU”, then press “ENTER” key to return to the sub menu.
17. Repeat the steps from 8 to 16 until the output is satisfactory, then enter “9” for “Select menu : ?” in
the menu indicated in Figure 4-31 and press “ENTER” key to return to the sub menu.
18. If there is no adjustment to be performed, enter “9” for “Select menu : ?” to select “Customer data
change/End” in the menu, then press “ENTER”.
19. Enter “9” for “Select menu : ?” to exit the program.
.......................
........................
...........................
.......................
........................
.................................
1
2
5
0
9
7
Stylus COLOR 800 J70C00E
Customer : Sstandard cistpmer DATA <**** > 12-03-0996
GOS paper print test
S.F. paper print test
O.Q.A. print test
Cleaning
Return to the MENU
Letter paper print test
Select Menu ?_
MC/No. : 000
Black voltage value : 24B16
Color voltage value : 14B14
Figure 4-31.
Setting Menu (3) for Print Inspection