Epson Stylus Color 800, Руководство по обслуживанию

Страница: 129 / 187

Adjustment
Rev. A
4-9
5. Enter the the 4-column code which corresponds to the destination for “Memory-SW data (4 col
data)” and press “ENTER” key. (See the code list on Page 4-6.)
6. Enter “2” for “Select menu : ?” to select “Adjustment/Print inspection” in the menu.
7. Press “ENTER” key, and the sub menu below appears.
8. Enter “0” for “Select menu : ?” to select “Ink charge” in the menu.
9. Press “ENTER” key, and the menu returns to the sub menu and the Initial ink charge sequence
starts. The Power LED on the control panel is blinking during this operation.
10. If you don’t proceed to the next adjustment, enter “9” for “Select menu : ?” to select “Customer
data change/End” in the current menu, and the menu returns to the main menu.
11. Enter “9” for “Select menu : ?” then press “ENTER” to exit the program.
...........
........................
......................
.....................
.......
.............
Ink charge
All adjustment
Select Menu ?_
BI-D (center value 0,0)
Gap Timming (center value 0,0)
.............
0
1
2
3
4
5
6
7
8
9
Stylus COLOR 800 J70C00E
Customer : Standard Customer Data <****> 12-03-1996
..........................
.......
..............................
Write to the Head voltage value
Head angular adjustment
BK.-M Linear adjustment
Head GAP timming adjustment
Bi-d adjustment
Print inspection
Ink discharge
Customer data change/End
Figure 4-10. “Adjustment/Inspection” Sub Menu