Epson Stylus Color 800, Руководство по обслуживанию

Страница: 28 / 187

EPSON Stylus
&2/25
800
Rev. A
1-20
‰
Panel Functions at Power On
This printer also enters various functions by holding down a specific button and turning on the printer.
Each combination and its function are described in Table 1-23.
Table 1-22. Panel Function with Power On
Button Pressed *
1
(while turning on the printer)
Function
Load /Eject
†
Starts LQ self-test printing.
Cleaning (Black)
†
Starts Draft self-test printing.
Cleaning (Color)
†
Enters default setting mode.
Load /Eject + Cleaning (Color)
†
Enters Hex-dump mode.
Load /Eject + Cleaning (Black)
†
Enters the printhead alignment mode.
Cleaning (Black) + Cleaning (Color)
†
Enters ink smudge prevention mode.
Load /Eject
+
Cleaning (Black)
+
Cleaning (Color)
Then press Cleaning (Color) button
once again within 3 seconds.
†
Resets a specific area of EEPROM and
Timer IC.*
2
*1: ”+” means to press one button while holding down the other button(s).
*2: Refer to Table 1-28 or the EEPROM map described in the Appendix.
‰
LED Indicators
Several printer conditions can be identified by LEDs on the control panel. Which LED (or LEDs) lights
varies, depending on the condition. See Table 1-24 for printer conditions and LED status.
Table 1-23. Printer Conditions and LED Status
Indicators
Printer Condition Power Ink out
(Black) Ink out
(Color) Paper Out
Power on condition On ---*
1
--- ---
Ink sequence Blinks --- --- ---
Ink cartridge change mode Blinks --- --- ---
Data processing Blinks --- --- ---
Paper out --- --- --- On
Paper jam --- --- --- Blinks
No ink cartridge or ink end (black) --- On --- ---
Ink level low (black) --- Blinks --- ---
No ink cartridge or ink end (color) --- --- On ---
Ink level low (color) --- --- Blinks ---
Enter EEPROM and Timer IC reset On
1 second
On
1 second
On
1 second
Maintenance request Blinks Blinks Blinks Blinks
Fatal error Blinks Blinks On On
*1: “---” means no effect.