B
Move the lock lever on the left and right side
outwards to open the front cover.
C
While holding the tabs of the media edge plate on
both sides, move the plate out of the way toward
both edges of the platen.
D
Raise the media loading lever.
E
Move to the back side, and remove the media
toward the rear.
F
Take up the media by operating the drive switch
according to how the media is rolled.
G
Rotate the right media holder handle to the near
side until it stops.
The part A on the illustration and the shaft of the
handle will be visible.
H
To prevent the media from dropping, lift up the
right lift lever to support media.
I
Loosen the right media holder fixing screw and
remove the media holder.
SC-F10000H Series/SC-F10000 Series User's Guide
Basic Operations
90
