B
Soak a soft cloth in water, wring it out
thoroughly, and then wipe any dirt off of the
window on the front cover.
For anything that cannot be removed with a
damp cloth, dip a cloth in neutral detergent,
squeeze it out, and then wipe the stubborn stain.
C
Move the lock levers on the left and right sides
outwards to open the front cover.
D
Wipe the inner side of the window.
For anything that cannot be removed with a
damp cloth, dip a cloth in neutral detergent,
squeeze it out, and then wipe the stubborn stain.
E
After wiping off stains, close the front cover and
move the left and right lock levers inwards.
Replacing Consumables
Replacing Ink Cartridges
If ink is expended, replace the ink cartridge immediately
with a new one. You can check the ink level on the Home
screen.
U
Two ink cartridges for each color are loaded into the ink
supply unit, so the cartridge not in use can be replaced
during printing.
Replacement procedure
c
Important:
❏
Epson recommends the use of genuine Epson
ink cartridges. Epson cannot guarantee the
quality or reliability of non-genuine ink. The
use of non-genuine ink may cause damage that
is not covered by Epson's warranties, and under
certain circumstances, may cause erratic
printer behavior.
Information about non-genuine ink levels may
not be displayed, and use of non-genuine ink is
recorded for possible use in service support.
❏
Due to ink characteristics, the ink cartridges of
this printer are prone to sedimentation
(components settling to the bottom of the
liquid). If ink settles, tint unevenness and
nozzle clogs occur.
Shake a new ink cartridge before installing it.
After installing it in the printer, remove and
shake it periodically.
SC-F10000H Series/SC-F10000 Series User's Guide
Maintenance
119
