Epson C12 Series, Руководство манипулятора

Страница: 25 / 314

Setup & Operation 1. Safety
C12 Rev.3 11
1.7 Warning Labels
The Manipulator has the following warning labels.
The warning labels are attached around the locations where specific dangers exist.
Be sure to comply with descriptions and warnings on the labels to operate and maintain the
Manipulator safely.
Do not tear, damage, or remove the warning labels. Use meticulous care when handling
those parts or units to which the following warning labels are attached as well as the nearby
areas.
Location Warning Label NOTE
A
To avoid getting hands or fingers caught,
fold the Arm and fix it with a belt or a
similar tool before removing the base
mounting screws.
B
Do not enter the work space when the
Manipulator is operating. It is
extremely hazardous since the Arm may
collide and cause serious safety
problems.
C
Do not touch the current-carrying parts
inside the Manipulator while the power is
ON. It may cause electrical shock.
D
When releasing the brakes, be careful of
the arm falling due to its own weight.
This warning label is attached on the
Manipulator and optional brake release
box.
E
Only authorized personnel should
perform sling work and operate a crane
and a forklift. When these operations
are performed by unauthorized
personnel, it is extremely hazardous and
may result in serious bodily injury and/or
severe equipment damage to the robot
system.
F
You may get your hand or fingers caught
when bringing your hand close to
moving parts.