EPS PSB 10000 4U Скачать руководство пользователя

Страница: 59 / 110

30000800_manual_psb_10000_4u_30kw_en_04

3.5.7

Switching the DC terminal on or off

The DC terminal of the device can be manually or remotely switched on and off. After the DC terminal has been switched

on, it can either work as a DC input (sink mode) or DC output (source mode). More information can be found in

“3.3.6. Sink-

source mode switching”.

Switching the DC terminal on during manual operation or digital remote control can be disabled by pin

REM-SB of the built-in analog interface. For more information refer to 3.5.3.1 and example a) in 3.6.4.7.

►

How to manually switch the DC terminal on or off

As long as the control panel is not completely locked press the button

On/Off

. Otherwise you are asked to disable the

HMI lock. In case the HMI lock is connected to a PIN, you are asked to enter the PIN first.

With the possible HMI lock removed, button

On/Off

toggles the DC terminal state, as long as this is not restricted by

an alarm or the device being in remote control.

►

How to remotely switch the DC terminal on or off via the analog interface

See section

““3.6.4. Remote control via the analog interface”.

►

How to remotely switch the DC terminal on or off via the digital interface

See the external documentation “Programming Guide ModBus & SCPI” if you are using custom software, or refer to the

external documentation from LabVIEW VIs or other software provided by the manufacturer.

3.5.8

Recording to USB stick (logging)

Device data can be recorded to USB stick (USB 3.0 is supported, but not all memory sizes) anytime. For specifications of the

USB stick and the generated log files refer to section

“1.9.6.5. USB port (front side)”.

The logging stores files of CSV format on the stick where the layout of the log data is the same as when logging via PC with

software EPS Power Control. The advantage of USB logging over PC logging is the mobility and that no PC is required. The

logging feature just has to be activated and configured in the Settings.

3.5.8.1

Restrictions

USB logging in this form isn’t available or automatically deactivated if the battery test logging in the battery test is activated

or the PV function

EN50530

is configured and loaded.

3.5.8.2

Configuration

Also see section

3.5.3.6. After USB logging has been enabled and the parameters

Logging interval

and

Start/Stop

have

been set, logging can be started anytime after leaving the

Settings

menu.

Furthermore see section

3.5.3.1

. There are additional settings for the CSV file itself as generated by the USB logging features.

You can switch the column separator format between german/european standard (

Default

) or US american standard (

The other option is used to deactivate the physical unit that is added by default to every set/actual value in the log file. Deac

tivating this option simplifies the CSV file processing in MS Excel or similar tools.

3.5.8.3

Handling (start/stop)

With setting

Start/stop

At DC on/off

logging will start each

time the DC terminal of the device is switched on, no matter if

manually with the front button

On/Off

or remotely via analog or

digital interface. With setting

Manual

it’s different. Logging is

then started and stopped only in the quick menu (see figure to

the right).

Button

starts logging manually and changed to

, which is for manual stop.

Soon after logging has been started, the symbol

indicates the ongoing logging action. In case there is an error while

logging, such as the USB stick is full or removed, it will be indicated by another symbol (

). After every manual stop or

switching the DC terminal off the logging is stopped and the log file closed.

Содержание PSB 10000 4U















































































































Результаты поиска

Содержание PSB 10000 4U

Отзывы:

Похожие инструкции для PSB 10000 4U

Бренды по названию

Популярные бренды

EPS PSB 10000 4U, Руководство по эксплуатации

Результаты поиска

Содержание PSB 10000 4U

Отзывы:

Похожие инструкции для PSB 10000 4U

Бренды по названию

Популярные бренды