EPS PSB 10000 4U Скачать руководство пользователя

Страница: 23 / 110

30000800_manual_psb_10000_4u_30kw_en_04

1.9.3

Scope of delivery

1 x Bidirectional power supply device
2 x Remote sensing plugs
1 x 1.8 m (5.9 ft) USB cable
1 x Set of DC terminal covers
1 x Sense terminal cover
1 x USB stick with documentation and software
1 x AC connector plug (clamp type)
1 x Set for AC cable strain relief

1.9.4

Accessories

For all models in this series, with or without water cooling option installed, the following accessories are available:

IF-AB

Interface modules

Pluggable and retrofittable, digital interface modules for RS232, CANopen, Profibus, ProfiNet,

ModBus TCP, EtherCAT or CAN are available. Details about the interface modules and the pro-

gramming of the device using those interfaces can be found in separate documentation. It’s

usually available on the USB stick, which is included with the device, or as PDF download on the

manufacturers website.

1.9.5

Options

These options are usually ordered along with the device, as they are permanently built in or preconfigured during the manu

facturing process.

1.9.6

The control panel (HMI)

The HMI (

uman

achine

nterface) consists of a display with touchscreen, two rotary knobs, a pushbutton and a USB port.

1.9.6.1

Touchscreen display

The graphic touchscreen display is divided into a number of areas. The complete display is touch sensitive and can be oper-

ated by finger or stylus to control the equipment.

In normal operation the left hand side is used to show actual values and set values and the right hand side is used to display

status information:

Actual voltage display

Voltage set value input

Additional status

Status area

Actual current display

Current set value input

Touch area for

rotary knob assignment

DC terminal status

Actual power display

Power set value input

Indicator source/sink mode

Actual resistance display

Resistance set value input

Touch areas for menu

access
Quick menu

Touch areas may be enabled or disabled:

Black text = Enabled

Grey text = Touch area temporarily

disabled

This applies to all touch areas. Some can additionally show a small padlock sign, indicating that the fea-

ture is permanently locked, usually due to a specific setting.

•

Actual / set values area (left hand side)

In normal operation the actual values (large numbers) and set values (small numbers) for voltage, current, power and resis-

tance on the DC terminal are displayed. For the two operation modes, sink (displayed as

) and source (displayed as

there are two separate set values each for current, power and resistance. The two resistance set values are only displayed

while resistance mode is active, while an actual resistance is only displayed during sink mode operation.

Содержание PSB 10000 4U















































































































Результаты поиска

Содержание PSB 10000 4U

Отзывы:

Похожие инструкции для PSB 10000 4U

Бренды по названию

Популярные бренды

EPS PSB 10000 4U, Руководство по эксплуатации

Результаты поиска

Содержание PSB 10000 4U

Отзывы:

Похожие инструкции для PSB 10000 4U

Бренды по названию

Популярные бренды