It may be that the camera connected to the PIXCI SV4 is the source of radiation. To determine if the camera is the source of
interference, remove power to the camera. If a shielded camera cable is not being used, use a shielded cable. If the camera is the
source of interference, contact the camera manufacturer.
11.2. Limited Warranty
EPIX, Inc. warrants to the original purchaser of the PIXCI SV4 board that the PIXCI SV4 board shall be in good working order
for a period of one year from the date of shipment from EPIX, Inc. Should this product fail to be in good working order at any
time during this one year warranty period, EPIX, Inc. will, at its option, repair or replace this product at no additional charge
except as set forth below. Repair parts and replacement products will be furnished on an exchange basis and will be either
reconditioned or new. All replaced parts and products become the property of EPIX, Inc.
This limited warranty does not include service to repair damage to the product resulting from accident, disaster, misuse, abuse, or
non-EPIX, Inc. modification of the product.
Limited warranty service may be obtained by delivering the product during the one year warranty period to an EPIX, Inc.
distributor or to EPIX, Inc. and providing proof of the purchase date. Insure the product or assume the risk of loss or damage in
transit. Prepay shipping charges to EPIX, Inc. or to the distributor. Use the original shipping container, or the equivalent, and
static dissipative packaging material.
EPIX, Inc. hereby disclaims all other express and implied warranties for this product, including the warranties of merchantability
and fitness for a particular purpose. Some states do not allow the exclusion of implied warranties, so the above limitations may
not apply to you.
If this product is not in good working order as warranted above, your sole remedy shall be repair or replacement as provided
above. In no event will EPIX, Inc. be liable to you for any damages, including any lost profits, lost savings or other incidental or
consequential damages arising out of the use of or inability to use such product, even if EPIX, Inc. or an authorized EPIX, Inc.
distributor has been advised of the possibility of such damages, or for any claim by any other party.
12. Footnotes
[1]
If modifying a previously installed XCAP: Right click the XCAP icon, select ''Properties'', select ''Program'', and modify the
''Name'' or ''Command Line'' as needed.
[2]
If the PC is configured with a selective boot option (i.e. so as to boot Windows or boot old DOS), be sure to modify the
correct CONFIG.SYS.
[3]
If modifying a previously installed XCAP: Right click the XCAP icon, select ''Properties'', select ''Program'', and modify the
''Name'' or ''Command Line'' as needed.
[4]
If modifying a previously installed XCAP: Right click the XCAP icon, select ''Properties'', select ''Program'', and modify the
''Name'' or ''Command Line'' as needed.
[5]
The identification code is provided on a card enclosed with the CD or diskette(s), and is also shown on the packing list. The
card and the identification code may be required as proof of purchase for future software upgrades. Keep the card in a safe
place!!
[6]
XCAP-Std and XCAP-Plus also require an authorization key to activate all features.
[7]
The required ''XCAP Sourcery'' TWAIN driver is a separate software product and is not included with XCAP.
[8]
The required ''XCAP Sourcery'' Image-Pro driver is a separate software product and is not included with XCAP.
PIXCI® SV4 User's Manual
http://www.epixinc.com/manuals/pixci_sv4/index.htm
50 of 50
1/29/2016 11:23 AM
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
