Start = 0x00000002
Type = 0x00000001
or, if using REGEDT32, the values should appear as:
ErrorControl:REG_DWORD:0x1
Group:REG_SZ:ExtendedBase
Start:REG_DWORD:0x2
Type:REG_DWORD:0x1
Shut down and restart Windows for the new registry entries to take effect.
3.
If the authorization key is connected to a non-standard printer port, an additional entry may be required:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\HardLock\Parameters
which contains a value:
IoPortAddress0 = 0x???? (for REGEDIT)
IoPortAddress0:REG_DWORD:0x???? (for REGEDT32)
where the ''????'' is replaced with the parallel port's I/O address in hexadecimal. As before, Windows must be shut down and
restarted.
4.
4. Getting Started
This chapter will guide the user through the initial steps common to most applications using the PIXCI imaging board: capturing,
viewing, examining, and saving images. This guide isn't intended to discuss every feature of every window in XCAP, just the most
important features to ''get up and running''.
By following the previous instructions, at this point:
The PIXCI imaging board has been installed.
a.
The camera has been connected to the PIXCI imaging board.
b.
The XCAP software has been installed.
c.
For XCAP-Plus or XCAP-Std, but not XCAP-Lite, the authorization key has been installed on the printer port.
d.
The PIXCI driver for Windows 95/98 or Windows NT, has been installed.
e.
The S/VGA has been set for 16 bits (minimum required), or 24 or 32 bits (preferred), per pixel.
f.
The PC has been rebooted (Ctrl+Alt+Del) so that the installed driver and the modified S/VGA settings (if any) have taken
effect.
g.
The following instructions are intended to be used while operating the PC; pictures of the S/VGA are intentionally not shown, in
favor of focusing the reader's attention on the real S/VGA screen.
4.1. Start XCAP
Start XCAP by clicking:
Start (on the Windows Taskbar)
XCAP Imaging
and then clicking:
XCAP for Windows
The XCAP Main Window now appears.
4.2. Open PIXCI Imaging Board
In the XCAP Main Window, click:
PIXCI
PIXCI Open/Close
A pop-up window appears.
Clicking:
Open
opens the PIXCI imaging board for use, removes the Open/Close pop-up window, creates a PIXCI Image Viewer window
PIXCI® SV4 User's Manual
http://www.epixinc.com/manuals/pixci_sv4/index.htm
19 of 50
1/29/2016 11:23 AM
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
