OK
4.3.3. Input Selection
To select one of the video input connectors on the imaging board's bracket, from the PIXCI® Image Viewer, click:
Capture
Adjustments
The video input connector may be selected numerically with:
Video Input (0 is the top most connector, 1 the next)
Alternately, a specific connector on the picture of the imaging board's bracket may be clicked.
4.3.4. Saving the Video Configuration
The selections under the Main Window:
PIXCI® Video Setup
and under the PIXCI® Image Viewer:
Adjustments
are automatically saved when the PIXCI® imaging board is closed, or XCAP is exited. When the PIXCI® imaging board is next
opened (from the XCAP Main Window clicking):
PIXCI
PIXCI Open/Close
Camera & Format
You may choose:
Open w. last used Video Setup
to use the previous video setup, or choose:
Open w. default Video Setup
to start anew with the default video format, resolution, and video input.
4.4. Capturing Images
Once the PIXCI® imaging board is opened for use, images may be captured from the PIXCI® Image Viewer, clicking:
Capture
Snap
or
Capture
Live
The
Snap
captures a single image into the current frame buffer, while
Live
continuously captures images into the current frame
buffer, continuously updating the image shown on the S/VGA.
The
Live
mode may be used to adjust the camera's focus, aperture, and position. The
Live
mode may be halted by clicking:
Capture
UnLive
A
Live
followed immediately by
Unlive
has the same effect as
Snap
.
If the current video resolution and frame buffer memory size allows more than one frame buffer, clicking:
Capture
Adjustments
provides the:
Current Frame Buffer: 0
or sometimes shortened to:
PIXCI® SV4 User's Manual
http://www.epixinc.com/manuals/pixci_sv4/index.htm
21 of 50
1/29/2016 11:23 AM
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
