which contains a value:
IoPortAddress0 = 0x???? (for REGEDIT)
IoPortAddress0:REG_DWORD:0x???? (for REGEDT32)
where the ''????'' is replaced with the parallel port's I/O address in hexadecimal. As before, Windows must be shut down and
restarted.
3.5. For Windows 2000
Install Files:
If XCAP is provided on diskette(s):
Insert XCAP diskette #1 into the A: or B: drive.
i.
Execute the SETUP program, from a command prompt, or via the Windows ''Start'', ''Run'':
> A:SETUP
or
> B:SETUP
ii.
Follow the installation program's directions, such as to select an installation directory, and insert additional
diskettes (depending upon version) as instructed.
iii.
a.
If XCAP is provided on a compact disk (CD):
If your PC is set to allow automatic execution of loaded CDs, the CD's interactive index program will be
executed automatically. Otherwise, execute the index program, from a command prompt, or via the Windows
''Start'', ''Run'':
> Z:SETUP (replace Z with drive letter for your CD)
i.
Select ''Setup PIXCI(R) Imaging Software'' and ''XCAP Imaging Application''. Click ''OK''.
ii.
Follow the installation program's directions, such as to select an installation directory.
iii.
b.
If XCAP is provided via the internet:
Download:
ftp.epixinc.com/software/xcap_v21/XCAPWI.EXE
from the EPIX, Inc. ftp site.
i.
Execute the downloaded program, from a command prompt, or via the Windows ''Start'', ''Run'':
> XCAPWI.EXE
ii.
Follow the installation program's directions, such as to select an installation directory.
iii.
Delete the downloaded .EXE file from your PC's hard drive.
iv.
c.
The installation procedure creates a new program group, containing XCAP and several .TXT files. The .TXT files
contain these installation instructions, a list of distributed files, corrections or additions to this manual, or other
up-to-date information. One file, PCITIPS.TXT, contains the PC Configuration Tips, which provides tips for
resolving hardware and software conflicts.
d.
1.
Create Shortcut - Drag & Drop (optional):
From the program group created by the installation program, click and drag the icon for XCAP over to the desktop
and drop.
a.
2.
Create Shortcut - Manual (optional):
Right click on the Desktop.
[4]
a.
Select ''New''.
b.
Select ''Shortcut''.
c.
Set:
Command Line: InstallDir \ XCAPWXX
Name: XCAP
replacing ''InstallDir'' with the name of the installation directory chosen above. Select ''OK''.
d.
3.
Install Authorization Key (for XCAP-Plus and XCAP-Std):
XCAP-Plus and XCAP-Std, but not XCAP-Lite, are provided with either a printer port authorization key or a USB
authorization key.
The printer port authorization key is approximately the size and shape of a printer cable's connector
(5.5×4.5×1.6 cm), but having 25 pin connectors at both ends and no cable attached. If provided, connect the
authorization key to printer port 1, 2, or 3. If a printer cable was attached to the printer port, reconnect the printer
cable to the back of the authorization key. The authorization key will not affect normal printer operation.
Do not connect the printer port authorization key to a 25 pin serial (RS-232) port, or to any other interface which
happens to use the same style connector; the authorization key will not function, might be permanently damaged, and
a.
4.
PIXCI® SV4 User's Manual
http://www.epixinc.com/manuals/pixci_sv4/index.htm
15 of 50
1/29/2016 11:23 AM
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
