installation, correcting problems, or integration with an OEM's procedures for the printer port version of authorization keys.
The file HARDLOCK.VXD must be copied to the Windows SYSTEM directory, typically:
C:\WINDOWS\SYSTEM
or placed in the same directory as XCAP, typically:
C:\XCAP
1.
Normally, all LPT ports are scanned for the authorization key. Should other hardware use, or overlap, one of the LPT I/O port
addresses, the search may be restricted to specific I/O ports. In AUTOEXEC.BAT, specifying:
SET HL_SEARCH=378p
SET HL_SEARCH=278p,378p
forces only the I/O port addresses listed (in hexadecimal) to be searched. Note that setting HL_SEARCH from a DOS box has no
effect, as the setting is not ''carried back'' from DOS into the Windows 95/98/ME environment.
3.3. For Windows NT
XCAP requires Windows NT Version 4 with Service Pack 3 or later. You must be logged on an Administrator, or have equivalent
privileges, to complete the installation procedure.
Install Files:
If XCAP is provided on diskette(s):
Insert XCAP diskette #1 into the A: or B: drive.
i.
Execute the SETUP program, from a command prompt, or via the Windows ''Start'', ''Run'':
> A:SETUP
or
> B:SETUP
ii.
Follow the installation program's directions, such as to select an installation directory, and insert additional
diskettes (depending upon version) as instructed.
iii.
a.
If XCAP is provided on a compact disk (CD):
If your PC is set to allow automatic execution of loaded CDs, the CD's interactive index program will be
executed automatically. Otherwise, execute the index program, from a command prompt, or via the Windows
''Start'', ''Run'':
> Z:SETUP (replace Z with drive letter for your CD)
i.
Select ''Setup PIXCI(R) Imaging Software'' and ''XCAP Imaging Application''. Click ''OK''.
ii.
Follow the installation program's directions, such as to select an installation directory.
iii.
b.
If XCAP is provided via the internet:
Download:
ftp.epixinc.com/software/xcap_v21/XCAPWI.EXE
from the EPIX, Inc. ftp site.
i.
Execute the downloaded program, from a command prompt, or via the Windows ''Start'', ''Run'':
> XCAPWI.EXE
ii.
Follow the installation program's directions, such as to select an installation directory.
iii.
Delete the downloaded .EXE file from your PC's hard drive.
iv.
c.
The installation procedure creates a new program group, containing XCAP and several .TXT files. The .TXT files
contain these installation instructions, a list of distributed files, corrections or additions to this manual, or other
up-to-date information. One file, PCITIPS.TXT, contains the PC Configuration Tips, which provides tips for
resolving hardware and software conflicts.
d.
1.
Create Shortcut - Drag & Drop (optional):
From the program group created by the installation program, click and drag the icon for XCAP over to the desktop
and drop.
a.
2.
Create Shortcut - Manual (optional):
Right click on the Desktop.
[3]
a.
Select ''New''.
b.
Select ''Shortcut''.
c.
Set:
Command Line: InstallDir \ XCAPWXX
Name: XCAP
d.
3.
PIXCI® SV4 User's Manual
http://www.epixinc.com/manuals/pixci_sv4/index.htm
11 of 50
1/29/2016 11:23 AM
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
