the warranty will be void!
The USB port authorization key is approximately the size of a small finger (6.0×1.6×0.8 cm), having a USB standard
4 pin connector at one end. If provided, connect the authorization key to a USB port.
The authorization key must remain attached, to the printer port or USB port as appropriate, while XCAP is running.
If the authorization key is missing, or disconnected while XCAP is running, then XCAP-Plus or XCAP-Std will
behave similar to the XCAP-Lite version; selected image processing and analysis tools will not be operational.
Run the authorization key utility program provided with XCAP by ''Start'', ''Run'':
> C:\XCAP\HLDINST -install
b.
Or, in command prompt mode, switch to the chosen installation directory:
> CHDIR C:\XCAP
and execute:
HLDINST -install
to run the authorization key utility program.
c.
Install PIXCI® Imaging Board Driver:
Under Windows 2000, the Windows' Device Manager must be used for initial installation of the PIXCI® driver.
If the PIXCI® imaging board was not yet installed, the first time Windows starts after installation Windows will
notice the new device and inquire.
The first time Windows 2000 starts after installation of the PIXCI® imaging board, a pop-up window with the
message ''Multimedia Video Controller'' will flash by. Next a pop-up window with the message ''Welcome to the
Found New Hardware Wizard'' will appear. Click ''Next''. Select ''Search for the best driver for your device''. Click
''Next''. Check the box for: ''Specify a location''. Enter path DRIVERS\WIN2K within the chosen installation
directory, such as C:\XCAP\DRIVERS\WIN2K, and click ''Next''. A pop-up window will report that a driver was
found, namely C:\XCAP\DRIVERS\WIN2K\EPIXXCW2.INF. Click ''Next''. A pop-up window will report that a
''Digital Signature was not found''. Click ''Yes''. A pop-up window with the message ''Completing the Found New
Hardware Wizard'' will state that ''This device is not configured correctly. (Code 1)''; this error indicates that the
newly installed driver will be functional only after a reboot. Click ''Finish'' and reboot Windows.
If the PIXCI® imaging board was already installed under Windows 2000, and ''Cancel'' was clicked when Windows
started and announced the presence of a new ''Multimedia Video Controller'', then instruct Windows to load the
appropriate driver. Click ''Start'', ''Settings'', ''Control Panel'', ''System'' (if ''System'' is not listed, click on ''view all
Control Panel options''), ''Device Manager'', and ''Other Devices'' or ''Imaging Devices''. Select ''PCI MultiMedia
Video Device'' (which appears if a PIXCI® imaging board driver was never installed), or ''PIXCI(R) Video Capture
Board'' (which appears if a PIXCI® imaging board driver was previously installed). Double-click on the entry to
bring up the ''Properties'' window. Click the ''Driver'' tab, and then click ''Change Driver'', or ''Update Driver''. A
pop-up ''Welcome'' window will appear, click ''Next''. A pop-up window with the messages ''This wizard searches for
updated drivers for:'' and ''PCI MultiMedia Video Device'' or ''PIXCI(R) Video Capture Board'' will appear. Select
''Search for a suitable driver for my device (recommended)''. Click ''Next''. Check the box for: ''Specify a location''.
Enter path DRIVERS\WIN2K within the chosen installation directory, such as C:\XCAP\DRIVERS\WIN2K, and
click ''Next''. A pop-up window will report that a driver was found, namely C:\XCAP\DRIVERS\WIN2K
\EPIXXCW2.INF. Click ''Next''. A pop-up window will appear stating that a ''Digital Signature was not found''. Click
''Yes''. A pop-up window with the message ''Completing the Found New Hardware Wizard'' will appear and may state
that ''This device is not configured correctly. (Code 1)''; this error indicates that the newly installed driver will be
functional only after a reboot. Click ''Finish'' and reboot Windows.
a.
5.
Configure S/VGA:
A ''High Color (16 bit or 65536 Color)'', ''True Color (24 bit or 16777216 Color)'', or ''True Color (32 bit)'' setting for
the display adapter (S/VGA) is required for proper display of images and overlay graphics. The ''True Color (24 bit or
16777216 Color)'' or ''True Color (32 bit)'' is suggested for higher quality, and quicker, display of images and overlay
graphics. This may be checked and/or modified via Windows ''Start'', ''Settings'', ''Control Panel'', ''Display'', ''Settings''.
a.
Under ''Start'', ''Settings'', ''Control Panel'', ''Display'', ''Effects'', the ''Show window contents while dragging'' must be
disabled.
b.
6.
Reboot Windows.
7.
XCAP is now ready to run, clicking ''Start'', ''Programs'', ''XCAP Imaging'', and finally ''XCAP for Windows''.
8.
3.6. Windows 2000 Esoterica
3.6.1. Windows 2000 - Manual Installation
PIXCI® SV4 User's Manual
http://www.epixinc.com/manuals/pixci_sv4/index.htm
16 of 50
1/29/2016 11:23 AM
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
