PCI
Communication Board
IEEE1284 Parallel
771-PCIPAR000-002
Introduction
Thank you for purchasing IEEE1284 interface PCI add-on card . This card
enables users to expand one or two additional LPT communication ports on
their PC-based system for connecting their parallel devices. Parallel (LPT)
port offer data transfer rate up to 2.7Mbps with built-in ECP/EPP/SPP/BPP
auto-switching operation modes to give you maximum system performance
and efficiency via DB25 pin female connector. Due to current mainboad does
not equip any Parallel (LPT) port, this card is your best solution to utilize your
CENTRONICS peripheral with parallel port in an easy-to-use environment
and creates for use in the commercial automation and as well ideal for home
or office uses.
Package List
Please check if the following items are present and in good condition upon opening
your package. Contact your vendor if any item is damaged or missing.
PCI IEEE1284 Parallel Communication Board
Quick Installation Guide (this document)
CD Driver
Second LPT Port Expansion Cable with Bracket (
)
Note
We provide 1 or 2 parallel LPT ports product for user selection. The expansion
LPT port and cable accessory will depend on what product you bought. Only two
NOTE:
parallel LPT ports product attaches cable accessory.
Hardware Guide
1
1-port PCI IEEE1284 Parallel Board
2-port PCI Parallel LPT Card
1
3
2
3
Parallel Port 1 (LPT2)
Parallel Port 2 (LPT3) / DB25F Connector Bracket Set
Only for 2-port Parallel Card
Pin Header to Parallel Connector
Please connect
&
with each other.
2
1
2
3
2
2-port PCI IEEE1284 Parallel Board
Specification
Model
PCI IEEE1284 Parallel Communication Board
Controller
SUN1888 IEEE1284 Parallel Controller
Bus Interface
PCI 33MHz Version 2.2/2.1 Specification.
Number of Ports
One or Two DB25 Female Ports
IRQ & IO Address
Assigned by BIOS / O.S.
FIFO
16 byte hardware FIFO
Data Speed
Driver Support
Pin Assignment
Maximum 2.7MBps
Operation Temperature: 0 C~ 60 C (32 to 140°F)
Storage Temperature: -20 C~ 85 C (-4 to 185°F)
Humidity: 5 ~ 95% RH
°
°
°
°
Environment
Operation Mode
ECP/EPP/SPP/BPP (System Auto-Switching)
Bracket
Standard 121 mm (Optional Low Profile 79.2 mm)
Windows 3.1 / 9x / NT / 2000 / XP / 2003 / Vista
Linux 2.2.x, 2.4.x, 2.6.x,
DOS
Certification
CE, FCC ClassB / Microsoft WHQL / RoHS
In order to ensure proper operation of your PCI IEEE1284 Parallel board, the driver will
be in the CD bound with your product. You can specify the location (folder) as below:
1. Please double click the
file or specify the driver locate
within folder of the attached driver CD.
2. When the welcome screen appears, click “
”.
3. System will search "
driver
4. After installing driver successfully, please select "
to complete the steps.
Setup.exe
Next
Finish
PCI 4018 Multi-IO Adapter"
"
Driver Installation
Operation System
Windows 2000 / XP / 2003 / Vista (32-bit)
Driver Location
Windows 95 / 98 / Me
:\IO\PCI IO\Win9x\
Windows NT4.0
:\IO\PCI IO\WinNT\
Windows 3.1 / DOS
:\IO\PCI IO\DOS\PCIDOS.exe
Linux 2.4.x, 2.6.x
System Default Driver, LPT #2 or LPT #3
Windows XP / 2003/Vista (64-bit)
:\IO\PCI IO\2K & XP & 2003&Vista_32bit\
:\IO\PCI IO\XP& 2003&Vista_64 bit\
Quick Installation Guide
Version 1.3
