•
15R00SDB100
•
SOLARDRIVE
PLUS
AC DRIVE FOR SOLAR PUMPING APPLICATIONS
PROGRAMMING GUIDE
Agg. 14/05/2020
R. 00
SW Ver. 4.10x
•
This manual is integrant and essential to the product. Carefully read the instructions contained herein
as they provide important hints for use and maintenance safety.
•
This product is to be used only for the purposes it has been designed to. Other uses should be
considered improper and dangerous. The manufacturer is not responsible for possible damages
caused by improper, erroneous and irrational uses.
•
Enertronica Santerno is responsible for the product in its original setting.
•
Any changes to the structure or operating cycle of the product must be performed or authorized by
Enertronica Santerno.
•
Enertronica Santerno assumes no responsibility for the consequences resulting by the use of non-
original spare-parts.
•
Enertronica Santerno reserves the right to make any technical changes to this manual and to the
product without prior notice. If printing errors or similar are detected, the corrections will be included in
the new releases of the manual.
•
The information contained herein is the property of Enertronica Santerno and cannot be reproduced.
Enertronica Santerno enforces its rights on the drawings and catalogues according to the law.
Enertronica Santerno S.p.A.
Via della Concia, 7 - 40023 Castel Guelfo (BO) Italy
Tel. +39 0542 489711 - Fax +39 0542 489722
E n g l i s h
