Endress+Hauser Proline Promass F 300, Руководство по эксплуатации

Страница: 30 / 264

Installation Proline Promass F 300 EtherNet/IP
30
Cover locking
NOTICE
Order code "Housing", option L "Cast, stainless": The covers of the transmitter housing
are provided with a borehole to lock the cover.
The cover can be locked using screws and a chain or cable provided by the customer.
‣
It is recommended to use stainless steel cables or chains.
‣
If a protective coating is applied, it is recommended to use a heat shrink tube to protect
the housing paint.
1
1
2
2
1
5 (0.2) min. 15 (0.6)
SW 2.5
M3
A0029800
1 Cover borehole for the securing screw
2 Securing screw to lock the cover
6.2 Mounting the measuring device
6.2.1 Required tools
For sensor
For flanges and other process connections: Corresponding mounting tools
6.2.2 Preparing the measuring device
1. Remove all remaining transport packaging.
2. Remove any protective covers or protective caps present from the sensor.
3. Remove stick-on label on the electronics compartment cover.
6.2.3 Mounting the measuring device
L
WARNING
Danger due to improper process sealing!
‣
Ensure that the inside diameters of the gaskets are greater than or equal to that of the
process connections and piping.
‣
Ensure that the gaskets are clean and undamaged.
‣
Install the gaskets correctly.