Endress+Hauser Proline Promass F 300, Руководство по эксплуатации

Страница: 112 / 264

Commissioning Proline Promass F 300 EtherNet/IP
112
Parameter Prerequisite Description User interface /
Selection / User
entry
Factory setting
Current span – Select current range for
process value output and
upper/lower level for alarm
signal. • 4...20 mA NAMUR
• 4...20 mA US
• 4...20 mA
• 0...20 mA
• Fixed current Country-specific:
• 4...20 mA NAMUR
• 4...20 mA US
0/4 mA value One of the following options is
selected in the
Current span
parameter (→  112):
• 4...20 mA NAMUR
• 4...20 mA US
• 4...20 mA
• 0...20 mA
Enter 4 mA value. Signed floating-point
number Country-specific:
• 0 kg/h
• 0 lb/min
20 mA value One of the following options is
selected in the
Current span
parameter (→  112):
• 4...20 mA NAMUR
• 4...20 mA US
• 4...20 mA
• 0...20 mA
Enter 20 mA value. Signed floating-point
number Depends on country
and nominal
diameter
Fixed current The Fixed current option is
selected in the Current span
parameter (→  112).
Defines the fixed output
current. 0 to 22.5 mA 22.5 mA
Damping output 1 to n One of the following options is
selected in the
Assign current
output parameter (→  111):
• Mass flow
• Volume flow
• Corrected volume flow
• Target mass flow
*
• Carrier mass flow
*
• Density
• Reference density
• Concentration
*
• Temperature
• Carrier pipe temperature
*
• Electronic temperature
• Oscillation frequency 0
• Oscillation amplitude 0
*
• Frequency fluctuation 0
• Oscillation damping
fluctuation 0
• Tube damping fluctuation 0
• Signal asymmetry
• Exciter current 0

Detailed description of
the options
Oscillation
frequency, Oscillation
amplitude, Oscillation
damping
and Signal
asymmetry : Value 1
display parameter
One of the following options is
selected in the
Current span
parameter (→  112):
• 4...20 mA NAMUR
• 4...20 mA US
• 4...20 mA
• 0...20 mA
Set reaction time for output
signal to fluctuations in the
measured value. 0.0 to 999.9 s 1.0 s