Endress+Hauser Proline Promass F 300 Скачать руководство пользователя страница 21

Страница: 21 / 264

Proline Promass F 300 EtherNet/IP

Storage and transport

5.1

Storage conditions

Observe the following notes for storage:

‣

Store in the original packaging to ensure protection from shock.

‣

Do not remove protective covers or protective caps installed on process connections.

They prevent mechanical damage to the sealing surfaces and contamination in the

measuring tube.

‣

Protect from direct sunlight to avoid unacceptably high surface temperatures.

‣

Store in a dry and dust-free place.

‣

Do not store outdoors.

Storage temperature→  238

5.2

Transporting the product

Transport the measuring device to the measuring point in the original packaging.

A0029252

Do not remove protective covers or caps installed on process connections. They

prevent mechanical damage to the sealing surfaces and contamination in the

measuring tube.

5.2.1

Measuring devices without lifting lugs

WARNING

Center of gravity of the measuring device is higher than the suspension points of the

webbing slings.

Risk of injury if the measuring device slips.

‣

Secure the measuring device against slipping or turning.

‣

Observe the weight specified on the packaging (stick-on label).

Содержание Proline Promass F 300









































































































































































































































































Результаты поиска

Содержание Proline Promass F 300

Отзывы:

Похожие инструкции для Proline Promass F 300

Бренды по названию

Популярные бренды

Endress+Hauser Proline Promass F 300, Руководство по эксплуатации

Результаты поиска

Содержание Proline Promass F 300

Отзывы:

Похожие инструкции для Proline Promass F 300

Бренды по названию

Популярные бренды