Model OUM980 with OUSAF21 Inline Sensor
Commissioning
20
5.
Commissioning
5.1
Function Check
Warning!
Check all connections for correctness.
Make sure that the supply voltage is identical to the voltage written on the technical information!
5.2
Switching On
Familiarize yourself with the operation of the analyzer before it is first switched on. Please refer in particular to the "Safety
Instructions" and "Operation" sections. After power-up, the device performs a diagnosis for 30 seconds and then goes to the
measuring mode.
Lamp Initial Set-Up
If the analyzer is first time switched on with a new lamp, a “LAMP LOW” symbol will be shown on the display screen. And the
frond LED will be flashing and lamp alarm relay will be toggled. To remove this warning message, the lamp status has to be
initialized from the software. The lamp low warning shows as follow
Figure 5.1: Lamp status during start-up