Repair
LT5
86
Hauser
10.4 Return
The device must be returned if it is in need of repair or a factory calibration, or if the wrong
device has been delivered or ordered. According to legal regulations, Hauser, as
an ISO-certified company, is required to follow certain procedures when handling returned
products that have come into contact with measured materials.
To ensure safe, swift and professional device returns, refer to the procedure and conditions
for returning devices provided on the Hauser website at
http://www.endress.com/support/return-material
.
10.5 Disposal
Observe the following notes during disposal:
• Observe valid federal/national regulations.
• Ensure proper separation and reuse of the device components.