Endress+Hauser LT5 Скачать руководство пользователя страница 55

Страница: 55 / 96

LT5

Installation

Hauser

5.12 Measuring tape and measuring wire installation

• Never bend or damage the measuring tape.

• Ensure that the measuring tape does not become twisted inside the tank or while

the pipes are being laid out.

• Approximately half of the measuring tape is perforated with small holes at a 20-

mm intervals (1-inch intervals if using imperial units). Install the measuring tape so

that the perforated side is wound by the gauge.

• Check to make sure that the measuring tape and the measuring wire do not come

off the sheave elbow roller during the process, and inspect them after they have

been installed.

• If the measuring tape must be passed through the 135 ° sheave elbow, ensure safety

before installing the measuring tape, as the footing is extremely dangerous.

• Inspect the joint between the float and the measuring tape once they are connected,

as it cannot be fixed once the tank is filled with liquid.

Installation procedure

1. Extend the measuring tape while folding it back and forth in your hand

approximately every 1.5 m to ensure that the tape does not become twisted.

2. Open the sheave elbow cover and the gauge head cover.
3. Install the measuring tape so that it does not become twisted inside the guide pipe.

This completes the preparation for the measuring tape installation.

)

A0041208

 40

Measuring tape preparation. Unit of measurement mm (in)

Perforation

sheave elbow

Cover

Содержание LT5

































































































Результаты поиска

Содержание LT5

Отзывы:

Похожие инструкции для LT5

Бренды по названию

Популярные бренды

Endress+Hauser LT5, Руководство по эксплуатации

Результаты поиска

Содержание LT5

Отзывы:

Похожие инструкции для LT5

Бренды по названию

Популярные бренды