Endress+Hauser Liquiline Control CDC90, Руководство по эксплуатации

Страница: 93 / 118

Liquiline Control CDC90 Diagnostics and troubleshooting
Hauser 93
Item Error message Troubleshooting
406 Invalid data entry in calibration
settings.
‣
Check buffer values and limit values of
calibration results.
406 Invalid data entry
410 Unstable measured values.
‣
Ensure that the process is stable. Repeat the
calibration. Replace the sensor.
410 Measured value is unstable
411 Calibration calculations are invalid. 1. Set the correct references (buffer).
2. Repeat the calibration.
411 Invalid calibration result
‣
412 Calibration settings have not been
made.
‣
Repeat the calibration. Set the correct
references (buffer).
413 An error has occurred during
cleaning.
‣
Ensure that the actuators (pump, float
switches) are connected.
414 An error has occurred during buffer
filling. 1. Check buffer level.
2. Check float switches.
415 Sensor - adjustment error
415 Error during sensor adjustment
416 Unexpected command sent.
‣
Please correct the program steps for
calibration.
500 Warning limit for piston
movements exceeded.
‣
Carry out maintenance on the assembly.
501 Alarm limit for piston movements
exceeded.
‣
Carry out maintenance on the assembly.
502 Assembly position not defined.
‣
Check piston.
600600 Error message from the relay
module.
‣
Replace the relay module.
601 Level error
601 No float switch signal. 1. Fill canister.
2. Replace float switch.
602 No float switch signal. 1. Fill canister.
2. Replace float switch.
603 No float switch signal. 1. Fill canister.
2. Replace float switch.
604 Limit for residual volume of
canister liquid reached.
‣
Fill canister.
605 Limit for residual volume of
canister liquid reached.
‣
Fill canister.
606 Limit for residual volume of
canister liquid reached.
‣
Fill canister.
607 Warning limit for delivery volume
of pump 1 reached.
‣
Replace the pump.
608 Alarm limit for delivery volume of
pump 1 reached.
‣
Replace the pump.
609 Warning limit for delivery volume
of pump 2 reached.
‣
Replace the pump.
610 Alarm limit for delivery volume of
pump 2 reached.
‣
Replace the pump.
611 Warning limit for delivery volume
of pump 3 reached.
‣
Replace the pump.