Endress+Hauser ASP Station 2000 peristaltic, Руководство по эксплуатации

Страница: 126 / 200

Technical data ASP station 2000 peristaltic
126 Hauser
10.1.4 Sample preservation
The sample bottles are located in the lower section of the sampler. The sample compartment
temperature can be set directly with the PC software from +2 to +20 C (factory setting: +4 C). The
current sample compartment temperature is displayed at the controls and recorded in the internal
datalogger (optional). The evaporator and defrost heater are packed in the PU insulation behind the
inner shell, protected against corrosion and damage. The compressor and liquefier are located in the
upper section of the sampler.
All parts carrying media (e.g. tap, dosing system, distribution pans) can be easily disassembled and
cleaned without tools. The entire sample compartment is fitted with a seamless plastic inner shell
for easy and effective cleaning.
10.1.5 Hose pump data
10.2 Power supply
10.2.1 Electrical connection (circuit diagram)
See Section 4.1 "Wiring"
10.2.2 Supply voltage
Thermostat: 230 V AC, 50 Hz; optional: 110 to 125 V AC, 50/60 Hz;
(Fuse protection at installation max. 10 A)
Sampling: charge buffer operation 12 V, 12 Ah battery; trouble-free operation even in event of brief
interruption in power supply (see Section 4.1.3)
10.2.3 Cable entry
• 2 x cable gland M16
• 2 x cable gland M20
• 2 x cable gland M32
10.2.4 Cable specifications
See Section 4.1 "Cable types"
10.2.5 Power consumption
Approx. 340 W
10.2.6 Connection data interface
Serial interface:
• RS232 (optional for external datalogging), 4-pin socket on the front panel (see Section 4.1.7)
Dosing volume 20 to 9999 ml can be set at the controls
Dosing accuracy ± 5 ml or ± 5 % of the set volume
Repeat accuracy 5%
Conveying velocity > 0.5 m/s, to EN 25667
Conveying height max. 6 m (8 m optional)
Conveying distance max. 30 m