Endress+Hauser Analytik Jena multi N/C, Руководство по эксплуатации, Страница: 45 / 106

multi N/C pharma UV Connecting add-on devices
45

Click [P
OSITION
1
ADJUST
].
The autosampler arm now lowers the cannulas into the tube in position 1.

If necessary, increase or decrease the z values. Click [P
OSITION
1
ADJUST
] again
after each change to verify the change.

Once adjustment is complete, click [S
AVE
] to close the window.
7. Position the hoses in the clip (9) and attach the clip to the housing of the
multi N/C using one of the screws of the autosampler.
Attention: The hoses may not hinder the movement of the autosampler arm.
5.3 Sampler AS 10
WARNING
Make sure that no liquid reaches the cable connections or the inside of the equipment
or the power supply. There is a danger of electric shock.
CAUTION
Caution in the movement range of the sampler arm and the cannula during operation.
There is a risk of injury (crushing etc.)!
ATTENTION
Do not obstruct the sampler during running operation. The drives might be damaged.
Number of samples max. 10
Sample tubes 50 ml
Operating voltage 24 V DC via external power supply
Power consumption 30 W
Grid voltage of external power supply 100 – 240 V, 50 – 60 Hz auto-sensing
Dimensions (WxDxH) 160 mm x 130 mm x 300 mm
The autosampler is installed on the right side of the analyzer in a holder. It can be
loaded with 2 cannulas.
Technical data