ENCAD NovaJet 4, Руководство пользователя

Страница: 96 / 200

User's Guide
8-96 Preparing your printer for transport or storage
Removing the ink cartridges
➪ ➪
➪ ➪ ➪
To remove cartridges
!
Do not touch the flex contact area of the cartridge.
1 Press the Access Cartridges button to move the cartridges out of the
service station.
2 Close the tube clamps on the lines leading to the cartridges.
3 Remove the cartridge from the carriage by gently pulling the top edge
toward you, then lifting it out of the carriage. Unscrew the tube fitting and
remove the cartridge from the carrier. As soon as the cartridge is removed,
set it down to avoid leaking.
4 Remove the cartridge from the ink delivery line. Wipe the outside of the line
using a lint-free cloth to remove any ink.
5 Discard (or store) the cartridge and repeat the previous steps for the
remaining cartridges.
Notes:
• If you lay down a cartridge with ink in it, lay it on its front side so that the
flex contacts face up. This prevents ink from leaking out either the top
opening or out the jet area on the bottom.
• If you are returning the cartridge to ENCAD, please drain as much of the
ink out of the cartridge as possible, enclose it in a plastic bag, and seal the
bag.
• If you are returning the printer to ENCAD, remove all four cartridges. Be
sure the ink delivery lines are purged and that the service station has been
cleaned of excess ink.
• If you are storing the cartridge, seal it in a plastic bag.