ENCAD NovaJet 4, Руководство пользователя

Страница: 85 / 200

Printing vector data 7-85
User's Guide
PRINTING
VECTOR DA
T
A
Setting pen colors using software control
If your application has the ability to use 256 simultaneous colors,
Software control (the default) should be your preferred method. If you
have kept the Control option set for Software in the Printer Setup
menu, draw each entity with the color in which you want it to print.
Then configure your software's plot option so that each pen is as-
signed its own color. For example, Pen #1 = Color #1, Pen #2 = Color
#2, etc. For more information on setting pen colors in your drawing
application, see your application's user manual.
Setting pen colors using printer control
If you’ve set the Control option for Printer in the Printer Setup menu,
you must use the Pen Settings option in the Vector Palette menu to
assign the desired pen colors to correspond to the color in which your
entities are drawn. Using this method, printing is limited to 16
simultaneous colors.
Setting pen widths using software control
If you have kept the Control option set to Software (the default) in the
Printer Setup menu, assign a width to Pen #1 in your drawing applica-
tion. When you send the image to the printer, you assign pen widths in
the option sheet that your drawing application displays. For more
information on setting pen widths using software control, see the
user's manual for your drawing application.
Setting pen widths using printer control
If you have set the Control option for Printer in the Printer Setup
menu, you use the Pen Settings option in the Vector Palette menu to
assign a width to Pen #1. All settings in the Vector Palette menu can
be stored to a User # for future use.
Choose from the following pen widths:
0.08 mm 0.17 mm 0.25 mm
0.34 mm 0.42 mm 0.51 mm
0.59 mm 0.68 mm 0.76 mm
0.85 mm 0.93 mm 1.01 mm
1.10 mm 1.18 mm 1.27 mm