ENCAD NovaJet 4, Руководство пользователя

Страница: 92 / 200

7-92 Printing vector data
User's Guide
With HP-GL/2 emulation, the P1 and P2 defaults are at the corners of
the printing area (the Maximum setting). If your CAD software lets you
specify the location of P1 and P2, you can choose either normal or
maximum locations to reduce or enlarge the printed image.
➪ ➪
➪ ➪
➪
To scale the print area
1 From the Main menu, press the arrow buttons to advance to the Page
Format menu, then press Select.
2 Press the arrow buttons to advance to the P1/P2 option, then press Select.
The equals sign (=) blinks.
PAGE FORMAT
P1/P2=NORMAL
3 Press the arrow buttons to move between Normal and Maximum, then
press Select. The equals sign (=) stops blinking.
4 Press the Menu button to move back to the previous menu level.
Setting the wait time
Some software programs or drivers do not signal the printer with an end-
of-file command when the sending process completes. This is particu-
larly true if you use HP7580 and HP7585 emulations. You can tell if the
program you are using does not send an end-of-file command because
the Processing # of bytes message on the printer’s front panel stops
incrementing and the image does not print. When using HP-GL emula-
tion, the Wait Time option is set automatically so that the printer waits
30 seconds for the end-of-file command, then begins printing. The Wait
Time option lets you increase or decrease the length of time the printer
waits before printing without receiving the end-of-file command. The
default Wait Time, when in any other emulation mode than HP-GL, is
0:00 (the Off condition).