ENCAD NovaJet 4, Руководство пользователя

Страница: 23 / 200

User's Guide
Getting started 2-23
GETTING S
T
AR
TED
Using the power media feed and takeup system
The power media feed and takeup system facilitates long, unattended
printing runs by automatically unwinding and rewinding media as
prints are generated. It includes a feeder roll, a takeup roll, and a
sensor which prevents media from coming into contact with the floor.
The unit is standard on the NJP-50 and optional on other models.
The unit has a separate power cord and power switch. Be sure it is
plugged in and turned on before using it! The power switch is at the
right rear of the unit. There is also a Cut/Print switch. Be sure to set it
to "Print" for printing. Setting the switch to "Cut" reverses the direc-
tion of the rewinder so that you can bring a plot back and cut it using
the printer's cutter.
When the unit is first turned on, the unwinder will turn for a few
seconds. If the rewinder turns, the sensor is blocked. Clear anything
blocking the sensor before proceeding.
➪ ➪
➪ ➪ ➪
To load roll media
1 Load the media so it is oriented as shown in the illustration that follows.
Push the media roll onto the fixed roll guide. Slide the adjustable roll
guide until it fits firmly into the other end of the media core.
Lock the adjustable roll guide into place by tightening the thumbscrew.