ENCAD NovaJet 4, Руководство пользователя

Страница: 156 / 200

I-156 Maintenance
User's Guide
NJP-36 and NJP-50
Before installing the cartridge in the carrier, you need to prime it to
remove any air bubbles inside it and start the flow of ink. Before starting
this process, locate the NovaInk Tool Kit supplied with your printer. You
will need the jet plate suction bulb.
Ink cartridges generally last as long as the ink in a reservoir. When a
cartridge misfires or the quality deteriorates, you will want to replace it.
➪ ➪
➪ ➪
➪
To remove ink cartridges (NJP-36 and NJP-50 only)
Note: Before starting, you may want to do the following:
•
Have paper towels handy.
•
Wear disposable gloves.
•
Load a D-size (24" x 36") sheet of paper in the printer to protect the platen
from accidental ink spills.
1 Press the Access Cartridges button to move the carriage out of the service
station.
2 Close the tubing clamp on the line leading to the cartridge you are remov-
ing.
3 Unscrew the tube fitting and remove the cartridge from the carriage.
4 Lay the cartridge on its front side so the flex contacts are facing up. This
prevents the ink from leaking out either the opening in the top or out of the
jet area on the bottom.
Do not touch
flex contacts